You are here: Installation and Configuration Guides > Connector for Adobe Experience Manager > Troubleshooting Installation and Configuration Issues > Freeway Analysis Codes not Displayed when Sending Out Content for Translation

Freeway Analysis Codes not Displayed when Sending Out Content for Translation

Issue

The add-on for Lionbridge Freeway is installed, and Freeway analysis codes specified, but they are not displayed or available for selection when sending out content for translation.

Explanation

The URLs where Lionbridge Freeway provides the authentication service and the analysis code service are not correctly configured. If you have a firewall, you must configure your ports so that the Connector can communicate with these services.

Solution
  1. In the Freeway Config section of the Configuration page, enter the following settings:
Configuration Option Description
Freeway Auth URL The URL where Lionbridge Freeway provides the authentication service. This is https://fwapi.lionbridge.com/obvibundles/freewayauth.asmx.
Freeway Service URL The URL where Lionbridge Freeway provides the analysis code service. This is https://fwapi.lionbridge.com/obvibundles/service.asmx.

For detailed instructions, see Freeway Config.

  1. If you have a firewall, you must configure your ports so that the Connector can communicate with these URLs. For detailed instructions, see Configuring Network Settings for a Firewall.